Pintle Hooks Swivel Mounted

RIGID MOUNTED PINTLE HOOKS

Rigid Mounted Pintle Hooks

These Pintle Hooks are to be used with a drawbar with a 2 3/8"-3" diameter eye.

Part #ModelABGTWVLWt.
IQ09331R-5 Ton1 3/4"17/32"10,0002,0008
2055112R-8 Ton2"17/32"14,0003,2008.5
2056113R-15 Ton2"17/32"30,0006,00011
2057114R-20 Ton1 7/8"19/32"40,0008,00012.25
Rigid Mount Pintle Hook Replacement Parts
Part #Description
2105205Latch
2382151Snapper Pin, S-Hook and Chain for Latches
2117240R-5, R-8 and R-15 Ton Mounting Kit
2117242R-20 Mounting Kit

R-30 Ton Rigid Mounted Pintle Hooks

These Pintle Hooks are to be used with a drawbar with a 2 3/8" - 3" diameter eye.

Part #ModelGTWVLWt.
2089176Latch Assembly

Pull Release Pintle Hooks

These Pintle Hooks are to be used with a drawbar with a 2 3/8" to 2 3/4" diameter eye and a ring thickness 1 5/8".

Part #ModelGTWVLWt.
2389158CPR 15 Cable Pull30,0007,50025
2389158RRPR Ring Release30,0007,50025

50 Ton 4 Bolt Rigid Mount Pintle Hook

These Pintle Hooks are to be used with a drawbar with a 2 3/8" to 3" diameter eye and a ring thickness 1 1/4" to 1 5/8". The mounting plate should at least 7/8" thick.

Part #ModelGTWVLWT
2354454*R-50 Ton 4B100,00020,00045
2354454SR-50 Ton 4B No air100,00020,00030
50 Ton 4 Bolt Rigid Mount Pintle Hook Replacement Parts
Part #Description
54454LLatch Assembly
23454PPlunger
23454MBMounting Bracket
23454ACAir Cylinder
2391TThimble for Air Cylinder Rod

50 Ton 6 Bolt Pintle Hook

These Pintle Hooks are to be used with a drawbar with a 2 3/8" to 3" diameter eye and a ring thickness 1 1/4" to 1 5/8". The mounting plate should at least 7/8" thick. There are two bolt different patterns for there Pintle Hooks, please see drawings.

Part #ModelGTWVLWt.
R-50 Ton 4B No Air100,00020,00040
2060117*R-50 Ton 6-B100,00020,00060
2010985NAR-50 Ton 6-B No Air100,00020,00040
2010985*R-50 Ton 6-B100,00020,00060
50 Ton 6 Bolt Rigid Mount Pintle Hook Replacement Parts
Part #Description
2091178Latch Assembly
2060PPlunger
2060MBMounting Bracket
2060ACAir Cylinder

50 Ton 6 Offset Bolt Pintle Hook

These Pintle Hooks are to be used with a drawbar with a 2 3/8" to 3" diameter eye and a ring thickness 1 1/4" to 1 5/8". The mounting plate should at least 7/8" thick.

Part #ModelGTWVLWt.
2060115No air cylinder, brackets, bolts100,00020,00040
15815Plunger
15710SPRINGSpring
158150RRod Extension Pin

R-75 Ton Pintle Hook

Part #ModelGTWVLWt.
207501275 Ton Pintle Hook150,00030,000
NB20541175 Ton Pintle Hook-No Air Cylinder
R-75 Ton Replacement Parts
Part #Description
2093180Latch Assembly
2075012PPlunger
2075012MBMouting Bracket
{ lazyloadBackgroundObserver.observe( lazyloadBackground ); } ); }; const events = [ 'DOMContentLoaded', 'elementor/lazyload/observe', ]; events.forEach( ( event ) => { document.addEventListener( event, lazyloadRunObserver ); } ); } )();